R-22 R22 ARKEMA R-427A REFRIGERANT, 25 LB. CYLINDER R22 Replacement

Description

**This tank is filled with 25lbs of R427a gas**
ARKEMA R-427A REFRIGERANT, 25 LB. CYLINDER
R427A is the ideal R22 retrofit/replacement for air conditioning, heat pumps, and refrigeration applications.
Benefits include: ^ Better efficiency than most R22 retrofits
Comparable capacity to R22
Nearly identical pressures to R22
Lower discharge temperatures
Mineral oil compatible
No TXV replacement required
Copeland Discus™ and Bitzer approved
*We comply with all applicable laws and ensure that the bidders and buyers are properly certified.*
YOU MUST HAVE EPA CERTIFICATION TO PURCHASE THIS REFRIGERANT
IF YOU DO NOT HAVE CERTIFICATION
, YOU MUST SIGN A STATEMENT WITH YOUR FULL LEGAL NAME STATING YOU INTEND TO RE-SELL THE REFRIGERANT TO A CERTIFIED PERSON.
JUST CUT AND PASTE THE STATEMENT BELOW WITH THE INFORMATION FILLED OUT AND SEND IT IN A MESSAGE (ASK QUESTION) TO MAKE IT LEGAL TO PURCHASE
All winning bidders will be required to complete form below or submit EPA 609 or 608 certificate.
I hereby certify that the cylinders of refrigerant that I am purchasing are being purchased solely for the purpose of reselling them to or will be installed by an EPA certified technician. I certify that I will comply with all applicable Local, State and Federal regulations and laws and that I am legally permitted to purchase, accept delivery of, possess and resell these cylinders of refrigerant.
Name:_________________________
________________________
Address:______________________
______________________________
______________________________
Date:________________________
EBay user ID ______________________________
__________________
*PLEASE NOTE*
–
This ships via Hazmat
signature is required for delivery
.
–
This product is shipped in compliance with Federal Hazmat Regulations. This means your product will be correctly handled by carrier.
-BUY REFRIGERANTS ONLY FROM SELLERS THAT OFFER LEGAL HAZMAT TRANSPORTATION WITH HAZMAT SHIPPING PAPERS. WE WORK WITH Fedex.
–
NO RETURNS ON REFRIGERANT GASES UNLESS IT IS DONE IN COMPLIANCE WITH FEDERAL HAZMAT REGULATIONS AND RETURN SHIPPING FEES PAID BY THE BUYER.
Please have someone available for delivery.
Again, signature is required for delivery
Step 1: Establish baseline performance
Check the system for leaks and identify any needed repairs. Run the system using the correct OEM charge of R-22 and record performance parameters using an Arkema Retrofit Data Sheet.
Step 2: Recover existing R-22
Recover existing R-22 refrigerant (DO NOT vent to the atmosphere) and make sure not to mix with other refrigerant gases. Record the weight of refrigerant removed.
Step 3: Check lubricant
A lubricant change is not be required. Check the oil for moisture, acidity, and metal shavings or sediments. If the oil does not meet the desired specification, a complete oil change using POE is recommended.
Step 4: Replace the filter dryer.
Step 5: Leak check and evacuate the system
Conduct a pressure test using dry nitrogen to determine if the system has a leak, staying below the system pressure limitations. Repair any leaks as necessary. Pull a minimum vacuum of 500 microns and ensure that it maintains a vacuum. If the system does not hold vacuum, leaks may still be present.
Step 6: Charge the system with Forane
®
427A (R427A)
Remove refrigerant as a liquid only from the cylinder, being careful not to damage the compressor. The initial weight should be approximately 95% of the original charge for R-22, charging up to 100% if necessary.
Step 7: Start the system and check performance
Start the system and record system performance, noting superheat and subcooling. Adjust TXV set-point and/or refrigerant charge
Each product has a 20% restocking fee charge, on any items returned.