2005-21 Yamaha TTR230 R Custom Jetting Carburetor Carb Stage 1-2-3 Jet Kit

Description

TTR230 Jet Kit
Get MAXIMUM PERFORMANCE
&
LONGER ENGINE LIFE
EXHAUST POPPING?
FEELS SLUGGISH?
These are signs of a
LEAN
ENGINE,
a Jet Kit will fix those issues.
Kit Includes:
Main Jets
Pilot Jet
Needle Adjusters
Nylon Needle Spacer
Drill Bits for
Idle Mixture Modification
Intake Airbox Modification
Exhaust Modification
Tuning Tech
Bike Specs
Carb Schematic
Carb Synchronizer Tool (how to build for $5)
Step by step instructions with photos for ease of installation.
Installation Support – If you need assistance we are there for you.
EVERY
Kit Custom Engineered
EVERY
Time
MADE
IN
USA
Benefits
More Peak
Horse Power
Designed to gain about
8%-10%
in HP with intake and exhaust, 2-3% on bone stock.
Longer Engine Life
The jet kit is a performance upgrade that not only increases power, but allows the engine to run cooler which increases engine component life.
Increased Performance
Designed to improve all RPM ranges of performance and throttle response.
Lower
EGT’s
(exhaust gas temperatures)
If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you
will
damage your engine. Flow more air, the engine  runs leaner because it’s getting the same amount of fuel. Running lean causes detonation and hotter EGT’s which ruin exhaust valves and destroy engines.
We MUST have the following information to design & ship your Custom 6 Sigma Jet Kit
Year
Exact Model
Modifications (engine, exhaust, intake, filter type etc . . .)
Riding Elevation (height above sea level, and any extreme conditions)
Please provide this information in the NOTES TO SELLER section after check out or in email or through Ebay messages.
Shipping
Domestic orders will ship in 1-3 days and take about a week to receive from the date payment is made.
International orders ship in 1-3 days and take
at least
2 weeks to receive from the date payment is made.
Installation
The kit comes with complete instructions for installation. It is easy, just take it slow and pay attention. It is a straight forward process, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
Fair and Honest Guarantee
Our goal is to provide a quality upgrade for your bike at a reasonable cost.  If you receive your kit and have questions please contact us and we will do what it takes to ensure your satisfaction.  We have worked to keep our overhead low and are able to pass along those savings to our customers, hence the price differences.
FAQ’S
Q:
Is this kit for all (1,2,3,4,6) carbs on my bike?
A:  Yes,  1 Kit is for all the carbs on the bike. You only need to order 1 Kit for your bike.
Q:
Do you ship international, and how much?
A: Yes, we ship worldwide, for $16.
Q:
What size jets come in this kit?
A:
Each kit is different, based on the bike, modifications, and operating altitude
, so jet sizes vary.
Q:
What Stage (1-7) is this kit?
A:
Each kit is different, based on the bike, modifications, and operating altitude
, so the Stage varies.
Q:
Do I need a jet kit?
A: If you have made any modifications, or just want a little more performance out of your stock bike, then yes you do need a kit.
Q:
Can I install this kit?
A: Yes, you can install it,
don’t be intimidated if you’ve never done this before, only very basic skills are needed, and it has instructions with full support.
Q:
How long does it take to install?
A: Time varies, but it is directly related to the # of carbs on your bike. Allow at least 1/2 hour per carb.
Q:
Does this kit come with everything I need?
A:
Yes, it is a comprehensive performance upgrade kit. Not to be confused with a basic rebuild kit.
Q:
I just bought an intake/exhaust, why do I need this?
A:Why spend $300 to $700 for an exhaust and air filter that produce a 10%  increase in air flow while ignoring the big loss of horsepower due to not installing a comparatively inexpensive jet kit that increases the fuel flow to match.